Wolkom op ús websiden!
Constantan Flat Wire Koper Nikkel Alloy 6j40 Ribbon 0,4 * 2mm
Nije Constantan Flat Wire Koper Nikkel Alloy 6j11 lint 0.4 * 2mm
| Karakteristyk | Resistiviteit (200C μ Ω .m) | Max. wurktemperatuer (0C) | Tensile Strength (Mpa) | Smeltpunt (0C) | Tichtheid (g/cm3) | TCR x10-6/ 0C (20~600 0C) | EMF vs Cu (μ V/ 0C) (0~100 0C) |
| Alloy Nomenklatuer | |||||||
| NC003 (CuNi1) | 0.1 | 200 | ≥ 250 | 1095 | 8.9 | < 100 | -12 |
| Fysike eigenskippen | Metric | Comments |
| Tichtheid | 8,94 g/cc | |
| Meganyske eigenskippen | Metric | Comments |
| Treksterkte, Ultimate | 262 - 531 MPa | |
| Treksterkte, opbringst | 276 - 524 MPa | Ofhinklik fan temperatuer |
| Ferlinging by Break | 46.0 % | yn 50,8 mm. |
| Modulus fan elastisiteit | 115 GPa | |
| Poissons Ratio | 0.310 | Berekkene |
| Bewurkberens | 20 % | UNS C36000 (frij snijend messing) = 100% |
| Shear Modulus | 44,0 GPa | |
| Elektryske eigenskippen | Metric | Comments |
| Elektryske Resistivity | 0,0000120 ohm-cm @Temperatuer 20,0 °C | |
| Termyske eigenskippen | Metric | Comments |
| CTE, lineêr | 17,5 µm/m-°C @Temperatuer 20,0 – 300 °C | |
| Spesifike Heat Kapasiteit | 0,380 J/g-°C | |
| Thermyske konduktiviteit | 64,0 W/mK @Temperatuer 20,0 °C | |
| Smeltpunt | < = 1125 °C | Liquidus |
| Liquidus | 1125 °C | |
| Ferwurkjen Eigenskippen | Metric | Comments |
| Annealing temperatuer | 565 - 815 ° C | |
| Hot-wurktemperatuer | 815 - 950 ° C | |
| Komponint Eleminten Eigenskippen | Metric | Comments |
| Koper, Cu | > = 91.2 % | |
| Iron, Fe | 1,30 - 1,70 % | |
| Lead, Pb | < = 0.050 % | |
| Manganese, Mn | 0.30 – 0.80 % | |
| Nikkel, Ni | 4,80 – 6,20 % | |
| Sink, Zn | < = 1,0 % |
CuNi44 gemyske ynhâld, %
| Ni | Mn | Fe | Si | Cu | Oar | ROHS-rjochtline | |||
| Cd | Pb | Hg | Cr | ||||||
| 44 | 1% | 0.5 | - | Bal | - | ND | ND | ND | ND |
Meganyske eigenskippen
| Max Trochrinnende Service Temp | 400ºC |
| Resistiviteit by 20ºC | 0,49±5%ohm mm2/m |
| Tichtheid | 8,9 g/cm3 |
| Thermyske konduktiviteit | -6 (Max) |
| Smeltpunt | 1280ºC |
| Tensile Strength, N/mm2 annealed, Soft | 340~535 Mpa |
| Treksterkte, N/mm3 Kâldrôle | 680~1070 Mpa |
| Ferlinging (gloeijen) | 25% (min) |
| Ferlinging (kâld rôle) | ≥Min) 2% (Min) |
| EMF vs Cu, μV/ºC (0~100ºC) | -43 |
| Mikrografyske struktuer | austenite |
| Magnetyske eigendom | Non |
Skriuw jo berjocht hjir en stjoer it nei ús
